Why Is My Arlo Camera Blinking Blue?

You may be wondering what the blue light blinking on your Arlo camera indicates and how to resolve the problem. Because of its exceptional functionality, dependability, and simplicity of use, Arlo cameras are among the most widely used options for home security systems. However, Arlo cameras can encounter problems, just like any other device. Particularly for inexperienced users, a blinking blue light might be perplexing. This blog post will discuss the possible causes of an Arlo Camera Blinking Blue Light and offer solutions for troubleshooting.

Comprehending the Blue Blinking Light on the Arlo Camera

Depending on the situation, the Arlo Camera Blinking Blue Light might mean a number of various things. To convey various states, Arlo cameras are outfitted with a series of colourful LED indicators. Arlo camera blue blinking light are not unusual and are often a routine element of your Arlo camera’s functionality. But it might also be a sign of trouble.

Typical Causes of Arlo Camera Blinking Blue Light

1. The camera is synchronizing or pairing.

The camera is connecting or syncing with your Arlo base station or Wi-Fi network, which is one of the most frequent causes of an Arlo camera blue blinking light. Your camera must first establish a connection with the base station or your home Wi-Fi network in order to function correctly. The camera’s LED will glow blue during this operation to show that it’s attempting to connect.

How to proceed:

• A good synchronization of the camera is often indicated by the blue blinking light stopping.
• There can be an issue with the synchronizing procedure if the light keeps blinking. Try pushing the camera’s sync button once more, or see the user manual for instructions.

2. Firmware Update Underway

A firmware upgrade may also be the source of your arlo camera blue blinking light. When a new firmware version becomes available, Arlo cameras are built to update automatically, enhancing overall performance, security, and usefulness. When the Arlo camera is downloading or installing an update, the blue light will blink to show that the update is being installed. After the update is finished, the blinking will cease.

How to proceed:

• Give the camera time to complete the update. Avoid interfering with the process as this may result in issues with the camera’s operation.
• It can be a problem with the update if the camera stays in the blinking blue light condition for a long time. The Arlo Com Login page allows you to access your Arlo account and check for firmware updates or system alerts.

3. The Camera Is Seeking to Establish a Wi-Fi Connection

If your Arlo camera is experiencing issues connecting to your Wi-Fi network, it may flicker blue. This could occur if there is a problem with the router settings, the camera is out of range, or the Wi-Fi connection is poor. After blinking blue for a few seconds, the camera may occasionally connect properly; however, if not, you will need to fix the problem.

How to proceed:

• Make sure the camera is in your Wi-Fi router’s coverage area.
• Verify the reliability and intensity of the signal from your Wi-Fi network. Try moving to 2.4GHz if you’re on a 5GHz Wi-Fi band; it usually has a greater range.
• Try following the instructions in the user handbook for your Arlo camera to reset your camera and reconnect it to the network.

4. Problems with Battery Power

A blue blinking light might be a sign that the battery in your Arlo camera is low or that the camera is charging. Although this is usually accompanied by a red or amber light, if the camera is charging, it may occasionally show as a blue blinking light.

How to proceed:

• By signing into your Arlo Com Login account and going to the device’s settings, you may check the battery level of your camera.
• Plug the camera into its charger if the battery is low, or change the batteries if necessary.
• See if the blue blinking light goes away after the camera has finished charging by waiting for the battery to fully charge.

5. The camera is disconnected or offline.

Your Arlo camera may blink blue to signal a connectivity problem if it is not correctly linked to the base station or the internet. This frequently occurs when there are problems with your Wi-Fi network or when the base station loses internet access.

How to proceed:

• Go to the Arlo Com Login page and check the status of your system to see how your Arlo base station is doing.
• Verify the functionality of your internet connection.
• To restore the connection, try restarting the base station and your camera. Pressing the reset buttons on the base station and camera will do this.

6. Test Mode for the Arlo Camera

Before completing their setup, customers may test the operation of certain Arlo cameras by using the test mode. Your Arlo camera may glow blue while in test mode to show that everything is operating as it should.

How to proceed:

• Check to see if you put the camera on test mode by mistake if you just installed it. Since this is often a transient condition, the camera needs to automatically leave it after a brief interval.
• Follow the setup instructions in your Arlo manual to make sure the camera is configured correctly.

How to Fix Arlo Camera Blinking Blue Light?

You may fix the Arlo Camera Blinking Blue Light problem by following these easy steps:

• Examine the source of power: Verify that the camera is turned on correctly, using a power cord or batteries.
• Restart your gadgets: To check if the connection problems are fixed, restart your router, base station, and Arlo camera.
• Verify the Arlo system’s condition: Check your camera’s connection and see if there are any warnings by logging into your Arlo Com Login page.
• Reset the camera: Try the setup procedure again after restoring the camera to its factory settings if none of the aforementioned fixes resolve the issue.

Conclusion

Arlo Camera Blinking Blue Light is a typical occurrence, but it doesn’t necessarily indicate a serious issue. It usually indicates that the camera is having trouble connecting, upgrading its firmware, or associating with the base station. You should be able to fix the problem and restore your camera’s functionality by using the troubleshooting advice in this blog.