Why Is My Arlo Camera Not Connecting and How to Fix It?

Arlo cameras are a great option for home security because of its extensive features, user-friendly design, and high-quality video performance. But much like any technology, they occasionally have problems. Connectivity difficulties are among the most frequent challenges consumers face. It may be really annoying if your arlo camera not connecting, particularly if you depend on it to keep an eye on your home. This post will explain the possible causes of your Arlo camera’s failure to connect and offer practical solutions.

Typical Causes of arlo camera not connecting Problems

Poor Wi-Fi Signal

For Arlo cameras to function properly, a strong Wi-Fi signal is necessary. The signal may wane and cause problems connecting if the camera is too distant from the router or if there are obstacles like walls or furniture in the way.

Issues with Network Configuration

The connection between your camera and your router may be affected by changes to the security protocols, password, or SSID. The camera will not be able to connect if it is not updated with the new network details.

Software or Firmware Problems

Compatibility issues that result in arlo cameras not connecting or failures might be caused by outdated firmware on your Arlo camera or the Arlo software on your device.

Problems with the power supply or low battery

If your Arlo camera runs on batteries, connection problems may arise from a low or depleted battery. In a similar vein, wired cameras could encounter issues if their power supply is cut off.

Overload on the Network

Your Arlo camera may experience decreased bandwidth if your WiFi network is swarming with too many devices.

Other Device Interference

Arlo cameras not connecting issues may arise from nearby devices that interfere with the signal, such as cordless phones, microwaves, or baby monitors that use the same frequency as your Wi-Fi network.

Problems with the Arlo Base Station or Hub

The connection of your camera may be impacted by issues with your Arlo base station or SmartHub, including improper positioning, out-of-date software, or hardware failures.

How to Resolve arlo camera not connecting problem?

Authenticate strength of WiFi signal

Go to your camera settings after launching the Arlo application.
Seek out the indication of signal strength with arlo.com login.
Try tapping the camera nearer to the router or using a WiFi extension to fortify the linking if it’s poor.
Remove any physical barriers that stand between the router and the camera.

Check the Network Configuration if arlo camera not connecting to wifi

Make sure the right Wi-Fi network is linked to your camera.
2.4 GHz networks are often compatible with Arlo cameras, so confirm that your router is broadcasting on this frequency.
Verify again that the password and SSID you specified in the app correspond to the router settings.

Give Your Devices a restart

You may either remove and re-plug the power supply or take out and put back in the battery to restart your Arlo camera.
Restart your router and, if necessary, the SmartHub or Arlo base station.
Occasionally, a quick restart might fix short-term issues.

Update the software and firmware

Go to your device’s settings, launch the Arlo app, and look for firmware upgrades.
Install any updates that are available.
To guarantee compatibility, update the Arlo app on your tablet or smartphone to the most recent version.

Examine the Power Supply

Make sure the battery in any cameras that run on batteries is fully charged.
If the battery is broken or old, replace it.
Verify that the power cord for wired cameras is firmly attached and that neither the cable nor the adapter are damaged.

Decrease Congestion in the Network

To increase bandwidth, unplug unneeded devices from your Wi-Fi network.
Make sure your Arlo camera has enough bandwidth by giving it priority if your network has Quality of Service (QoS) options.

Reduce Interference

Place the camera and router away from electronics, Bluetooth devices, microwaves, and other equipment that could interfere with the signal.
To lessen intrusion from adjacent networks, alter WiFi channels in router settings.

Get Your Camera Back in Sync

Try resyncing your Arlo camera if it is dependent on a base station.
On both the camera and the base station, press the sync button.
A successful sync should be shown by the camera’s LED blinking.

Reset your camera to factory settings

You may reset your Arlo camera to factory settings if the whole thing flops.
By doing this, all settings will be aloof, returning the camera to its preliminary configuration.
To reset, adhere to the user manual’s recommendations. Use the Arlo app to re-configure the camera after the reset.

Avoiding Future arlo camera not connecting issues

Use these suggested steps to reduce the possibility of future connection issues:

Update the Arlo app and camera firmware on a regular basis.
Position your camera and router where there are the fewest obstacles possible.
Make use of a fast internet connection that has enough bandwidth for every device connected.
Check the battery level of the camera on a consistent basis and change it if obligatory.

Final remarks

Even though arlo camera not connecting problems might be infuriating, most issues can be resolved with precise troubleshooting. Take care of typical problems first, such as poor Wi-Fi signals, out-of-date software, or issues with the power supply.