Why is my arlo camera not detecting motion?

Arlo cameras are well known for its dependable security solutions that are intended to provide you peace of mind and protect your property safely. But just like other technologies, they could have problems from time to time. The inability of the Arlo camera to detect motion is among the most frequent issues that consumers have. This might be infuriating, chiefly if you are contingent on motion detection to record events and send out warnings. Thankfully, there are a few things you may do to analyze and fix this problem.

The possible causes of your arlo camera not detecting motion will be discussed in this blog, along with solutions and how the Arlo Com Login interface may help you control and optimize your device’s settings.

Typical Causes of Your Arlo Camera Not Detecting Motion

Let’s look into the typical causes if your arlo camera not detecting motion:

Inaccurate Motion Detection Configurations

Incorrectly adjusted motion detection settings are the most common reason why an Arlo camera fails to detect motion. The camera could not detect movement if the sensitivity is set too low.

Problems with Camera Positioning

The way your camera is positioned has a big impact on how well it detects motion. Motion detection may be affected if your camera is not facing the activity zone,is too high, or is tilted improperly.

Unconfigured Activity Zones Appropriately

You may designate particular activity zones to concentrate on with Arlo cameras. The camera may disregard movements outside of the designated areas if these zones are not set up correctly.

Software or Firmware Problems

Arlo camera not detecting motion issues are among the flaws that might arise from outdated firmware. Similar to this, problems synchronizing your Arlo account with your camera may prevent it from working properly.

Issues with Network Connectivity

Your camera’s motion detection and alarm systems may be impacted by poor Wi-Fi connectivity, which can interfere with communication between the camera and the Arlo servers.

Obstacles in the View of the Camera

Physical barriers like walls, furniture, or plants might make it difficult for the camera to detect motion.

Ways to Resolve the arlo camera not detecting motion problem

Here are some troubleshooting steps to follow if your arlo camera not detecting motion:

1. Verify and modify the motion sensitivity

Use the Arlo Login website or mobile application to access your Arlo account.
Go to the particular camera’s settings.
To check if the problem has been fixed, move the motion sensitivity slider to a higher setting.

2. Make the Most of Camera Positioning

Make sure your camera is positioned between seven and eight feet above the ground.
To properly cover the intended activity zone, tilt the camera slightly downward.
Avoid areas where there are sudden changes in illumination or a lot of glare.

3. Establish Activity Zones Rightly

Go to the activity zone settings using the Arlo app or Arlo Login.
To make sure the zones include locations where motion is anticipated, redraw or modify them.

4. Update the software and firmware

Check the Arlo app for firmware elevations.
To make sure your camera is running the current version, install any appliances that are accessible.

5. Change the batteries or recharge them.

Make sure the batteries in your camera are completely charged, or swap them out if needed.
Validate that the power supply is functioning appropriately for wired models.

6. Make Network Connectivity Stronger

Verify the strength and stability of your Wi-Fi signal.
If necessary, utilize a Wi-Fi extension or move your camera closer to the router.

7. Get Rid of Physical Barriers

Examine the camera’s range of vision and clear the region that is obstructed by items to detect motion.

8. Clear the camera and resync it

Resetting your Arlo camera to factory settings is the last resort.
Reconfigure its settings and re-add it to your Arlo account using the Arlo Com Login interface.

Managing Your Camera with the Arlo Login

An indispensable tool for controlling and troubleshooting your Arlo camera is the Arlo Login page. You may do the following by signing into your account:

Go to the motion detection settings and change them.
Set up camera positioning choices and activity zones.
Verify firmware versions and start the updating process.
Check the power and battery levels.
Examine the captured video to see if motion detection is functioning properly.

To sign in:

Go to the Arlo Com Login page.
To access your dashboard, enter your login information.
Go to settings on camera and make the compulsory changes.

Final thoughts

Your house or office’s security may be compromised if your arlo camera not detecting motion. You may find and fix the problem fast by being aware of the possible reasons and making use of resources like the Arlo Login site. For your Arlo camera to operate flawlessly, proper setup, consistent upkeep, and frequent upgrades are essential. Keep in mind that the surroundings and settings of your camera determine how successful it is. You can quickly restore your Arlo camera’s ability to detect activity and keep you safe by following these recommendations.

FAQ questions

How do I stop motion detection on Arlo?

Disabling motion detection in the Arlo app or Arlo Com Login interface will deactivate motion detection on your Arlo camera. Select “Disarmed,” go to the “Mode” options for the particular camera, or disable motion detection in a custom mode.

Can I adjust the motion detection area on my Arlo camera?

Yes, by setting up Activity Zones via the Arlo app or Arlo camera Login, you may modify the motion detection area. To concentrate on regions where motion detection is required and ignore others, define distinct zones inside the camera’s field of view.

What does Arlo motion sensitivity mean?

The camera’s ability to detect movement is determined by its Arlo motion sensitivity. While lesser sensitivity minimizes false warnings, higher sensitivity improves motion detection for delicate activities. You may change it via the camera settings on the Arlo app or Arlo camera Login.

Can I test my Arlo camera’s motion detection feature?

Yes, using the Arlo app’s Motion Detection Test or log in to Arlo Com. To see if the motion indicator lights or alerts turn on, turn on the test mode in the settings and move inside the camera’s field of vision. If necessary, change the parameters.